Cutting Machine

Cutting machine is the main equipment for Autoclave Aerated Concrete(AAC) products, it's necessary core equipments for capacity more than 50000m³/year, it's also necessary to increase the AAC capacity. Our JQF series cutting machine adopts advanced technology, with only one step,cut the cake in six sides, no need of hang the cake for second time,reduces the damage to the cake. So our cutting machines are welcomed all over the country,and gain honor from all our users. After years technology innovation,nowdays,we are able to produce many models of AAC cutting machies.

Working theory of the cutting machine:

Put the cake together with the bottom board onto the overturn plate, then move to the small slipway near cutting, after turn 90º, the cake will be move to the cutting palce from the slipway, then level cut the cake in four sides, and crossing cut the cake. After the cutting the cake will back to the overturn plate from the slipway, turn 90 º in reverse direction,the cake will back to the overturn plate,the whole process will finish automaticlly.

Advantages of the ground overturn cutting machine

1. structure Compact, easy to operate, less maintenance.

2. the level cutting and vertical cutting can be finish only once.

3. cut the cake in 6 sides,the final product accuracy is accord with standard of GB/T11969-1997.

4.Can also satisfy the requirement of producing slab, the final product accuracy is accord with standard of GB15762-1995.

5. Can recycle all the waste slurry, no secondary pollutation.

6. Cake no conglutination.

7. Level cutting adopt screw drive, solve the original problem of the lack of synchronization by hydraulic transmission.

8. No Limit and interlocked in mechanical systems to prevent accident by the improper operation of the equipment.

9. Have rapid replacement wire device.

10. No collapsing.

Technical parameter: